MIP18390 – MIP X-Duty™, Rear CVD Kit, Traxxas Bandit, Fiesta ST Rally


Ultra trough MIP shafts for your Traxxas Bandit… Slap em in and throw the power down!

2 in stock

SKU: 691545181509-1 Categories: , Tags: , , , , , , ,


 #18390 – MIP X-Duty™, Rear CVD Kit, Traxxas Bandit, Fiesta ST Rally
Traxxas Bandit 
  • For ultimate efficiency use with ball bearing Traxxas Rear Hubs. (TRA3752, TRA5116)
  • Strong 12mm Keyed Hex Standard (Must use 12mm wheels not compatible with pin)
  • When hubs are in the lowest position, clearance on the arm may be necessary for the X-Duty™ Bell to rotate freely. Best to use a sanding drum to clearance the plastic arm. (check out photo with wrench pointing to area)
  • Front Traxxas 12mm Hex Conversion : 1 x TRA1654
  • Upgrade Hubs and Bearings recommended : TRA3752 , TRA5116
Traxxas Fiesta ST Rally
  • Direct Fit, No Modification Needed.
  • Front CVD™ Kit: #19390
  • Strong splined X-Duty™ steel construction.
  • Fully rebuildable so any damaged or worn part can be replaced. (scroll down on main part # and all rebuild components are there)
  • Ultimate upgrade for those that are drag racing!
  • No more ripped and twisted drivetrain.
Pro Tips:
  • Use MIP Grease and Loctite upon assembly.
  • Be sure to keep joints lubed to enjoy long part life
  • Heat Treated steel components to help increase strength and part life.
  • Black Oxide coated to protect the components from premature rust.
  • 100% Designed / Manufactured / Packaged in the USA!!!
  • Complete Rear X-Duty™ Drivetrain
MIP X-Duty™ parts are rated for max 4S Lipos.


Additional information

Weight .45 lbs
Dimensions 6 × 6 × 3 in